Does artificial respiration work? About artificial respiration, how many types are there?

What is artificial respiration?

Through this action, if any victim does not breathe, breath is given through various artificial activities.

types of artificial respiration

There are four types of artificial respiration:

(1.)Shaffer Method

This method is used when the victim has blisters on his back. Then in this method the victim is made to lie on his stomach and his head is turned to one side. A thin pillow is placed under the victim’s chest.
Now try to inhale the body of the person suffering from the following two conditions

(a.)first position

In this, sit on your knees near the knees of the victim. Now place both your hands on the victim’s back in such a way that both the hands remain straight and the four fingers are joined together and they make a right angle with the thumb.

Also Read: what's the trick? Unit of Speed ​​and Types of Speed

(b.)second position

In this, leaning forward, put the weight on the back of the victim. After this, remove the pressure after two-three seconds and straighten both your hands.
In this method, when pressure is applied to the victim’s back, the air inside the lungs comes out and by removing the pressure, the fresh air outside goes inside the lungs. Thus, the victim is helped in breathing. Keep repeating the above actions at the rate of 10-12 times per minute till then. Until his breathing becomes normal.

(2.)Sylvester method

This method is used when a victim has blisters on his chest. Then in this method the victim is made to lie on the back. After this, a pillow is placed under the victim’s back, so that his chest rises slightly and the head becomes low.
Now try to inhale the body of the person suffering from the following two conditions

(a.)first position

In this, you sit on your knees near the head of the victim. Tie half fists of both his hands and spread the hands straight. Now slowly bend both the hands of the victim and bring them to his chest.

Also Read: What is an electrical circuit? types of electrical circuits

(b.)second position

In the first position, put some pressure on the victim’s chest with your hands. Now remove the pressure after two-three seconds and spread the hands of the victim towards his head and open fist.
Keep repeating the above actions at the rate of 10-12 times per minute till then. until his breathing becomes normal.
In this method, when pressure is applied on the victim’s chest, the air inside the lungs gets out and by removing the pressure, the fresh air outside goes inside the lungs. Thus, the victim is helped in breathing.

More Information:- 5 ‘S’ Concept

(3.) Mouth-to-mouth breathing (Labord method)

In this method, breathing is accomplished by filling air directly into the victim’s mouth.
Now the mouth-to-mouth air inhalation process is completed using the following two conditions:

Also Read: Meaning, definition, types, importance of freedom.

(a.) First Law

In this method, make the victim lie on his back. Now put a pillow etc. under the victim’s back, so that his mouth hangs slightly backwards.

(b.)second position

In this method, clean the mouth of the victim thoroughly. Now by placing a fine cloth over his open mouth and closing his nose with one hand, fill the air in his mouth with a forceful jerk in his mouth. And also keep in mind that the air gets out and his lungs swell. Remove your mouth to let the air out. Repeat the above actions at a rate of 10-12 times per minute until then. until his breathing becomes normal. While filling the air with forceful blow, the lungs of the victim inflate and fresh air goes in. When the mouth is removed, the air inside comes out. Thus, the victim is helped in breathing.
Nowadays, out of the above mentioned methods, the third method is more popular, because this method can be started immediately.

(4.)By artificial respirator

In this method, a breathing apparatus is used to give breath to the victim. In this device, air is filtered through a suitable rubber valve and enters the chamber. There are inlet and outlet valves, which open and close by pressing and releasing the rubber valve. Its Under this, air is sent inside the victim through a mask placed on the victim’s mouth. This is a very simple process. In this, the rubber valve is operated 15 to 20 times in a minute.

Also Read: About the types of lathe machines, how many types of lathe machines,

More Information:– 5 ‘S’ Concept

My Website:- iticourse.com

Also Read: What is a drill bush? Types of Drill Bush